SEW
handtools

AO Smith

HSE-SAS Series

Features


BLUE DIAMOND® GLASS LINING*

Blue Diamond® technology increases the life of the inner tank. The lining is stronger and more corrosion resistant than any other in the industry.
Siddharth Electricals.,

ANODE ROD

The tank has an anode rod which has stainless steel core that is designed to protect the tank from corrosive elements. The anode rod uses a special cathodic action to fight these elements and thus prolong the life of the water heater.

TEMPERATURE CONTROL KNOB

The temperature control knob allows you to set the temperature precisely between 25°C to 75°C .

SAFETY VALVE

The safety valve [not seen in picture] is designed to automatically relieve and discharge water in case the pressure overshoots the preset limits.

THERMAL CUTOUT

If the water temperature exceeds the highest preset level, the thermal cutout cuts off the power supply to assure safety.

THREE YEARS EXTENDED WARRANTY

The tank carries a 7 years warranty. The heating element has a 2 years warranty that can be extended to 3 years if registered within the first 2 months of purchase. All other parts carry a 2 years warranty. (Warranty applies only if the water heater is purchased from our authorised dealer)

SPECIFICATIONS


Model HSE-SAS-006 HSE-SAS-010 HSE-SAS-015 HSE-SAS-025
Volume [L] 6 10 15 25
Power [W] 2000 2000 2000 2000
Voltage Frequency [V/Hz] ~230/50 ~230/50 ~230/50 ~230/50
Actual Stdg. Loss [kWh/24h/45°C diff.] 0.412 0.515 0.592 0.721
Max. Stdg. Loss [kWh/24h/45 C diff.] [as per IS 2082:1993 amended in 2002] 0.792 0.990 1.138 1.386
Reheating Time for 35°C rise [in min] 6 11 18 29
Temperature range [ºC] 25-75 25-75 25-75 25-75
Rated water pressure [Bar] 80 80 80 80
Inlet/Outlet connections [Inch] 1/2 1/2 1/2 1/2


DIMENSIONS


Model HSE-SAS-006 HSE-SAS-010 HSE-SAS-015 HSE-SAS-025
A [mm] 317 373 373 444
B1 [mm] 317 373 373 444
B2 [mm] 348 405 405 483
C [mm] 258 277 348 383


enquiry



Go back
footer header
Copyright © Siddharth Electricals., All rights reserved